L3Harris Narda SignalShark, Руководство пользователя

Страница: 86 / 231

SignalShark User Manual
86
•
Select the Unit
To set the maximum power level:
1.
Tap the
Lmax
button.
2. Enter the required value and tap the unit button.
The setting is accepted immediately and the input window is closed.
3. Press the Esc key to close the menu.
To select the Unit:
1. Tap the Unit button.
The Unit dropdown menu opens.
2. Select one of the units (dBm, dBV, dBmV, dBuV) and close the menu by tapping the x
button.
Lrange
Here you can do the following:
• Set the range of the y-axis
• Set the Couple Views function On or Off
• Select Default Range or Auto Range
• Select the Unit
To set the y-axis range:
1.
Tap the Lrange button.
2. Enter the required value and tap the unit button.
The setting is accepted immediately and the input window is closed.
To select the unit:
1.
Tap the
Unit
button.
The Unit dropdown menu opens.
2. Select one of the units (dBm, dBV, dBmV, dBuV) and close the menu by tapping the x
button.
Unit
The Unit button allows you to set the unit of the y-axis.
To set the y-axis unit:
1.
Tap the
Display
button.
The menu opens.
2. Tap the Unit button.
3. Select the required unit from the dropdown list.
4. Press the Esc key twice to close the dropdown list and the menu.
Freq. Axis
The
Freq. Axis
button allows you to switch between
Abs.
and
Rel.
:
1. Tap the Display button.
The menu opens.
2. Tap the Freq. Axis button to switch between Abs. and Rel. .