L3Harris Narda SignalShark, Руководство пользователя, Страница: 81 / 231

Spectrum View
81
Setting the Rotary Mode
1. Tap the Rotary Mode button.
2.
Select the required value from the dropdown list and close the list using the
x
button.
Press the Esc key to close the context menu.
If Entry Mode is set to Fstart
Setting the start frequency (Fstart)
1. Tap the Fstart button.
2. Enter the required value and select a unit.
The setting is accepted immediately and the dropdown list is closed.
Setting the stop frequency (Fstop)
1. Tap the Fstop button.
2. Enter the required value and select a unit.
The setting is accepted immediately and the dropdown list is closed.
Setting the Auto Fcent trace
1.
Tap the
Auto Fcent Trace
button.
2. Select the required value from the dropdown list and close the list using the x button.
Selecting the Auto Fcent function
Tap the Auto Fcent button.
Setting the step width (Fstep)
1. Tap the Fstep button.
2. Enter the required value and select a unit.
The setting is accepted immediately and the dropdown list is closed.
Selecting a transmitter table (Transmitter Tab.)
1. Tap the Transmitter Tab. button.
2. Select a transmitter table from the dropdown list and after confirming with OK the list is
closed.
Setting the Rotary Mode
1. Tap the Rotary Mode button.
2.
Select the required value from the dropdown list and close the list using the
x
button.
Press the
Esc
key to close the context menu.
Setting the resolution / EMC bandwidth (RBW /
EBW)
Here you can do the following:
1. Set the resolution bandwidth ( RBW ) or EMC bandwidth ( EBW ).