COMPONENT MAINTENANCE MANUAL
AVIATION RECORDERS
FA2100CVR
Rev. 15 Page 402
Apr. 14/16
Cleaning
23–70–04
Use or disclosure of information on this sheet is subject
to the restrictions on the cover page of this document.
CAUTION: DO NOT IMMERSE ANY PRINTED WIRING ASSEMBLY MOUNTED ELECTRONIC
PARTS IN THE CLEANING SOLVENT; OTHERWISE, CIRCUIT BOARD AND/OR
COMPONENT DAMAGE MAY RESULT.
A.
Printed Wiring Assembly Cleaning
(1)
Remove dust, dirt, and foreign matter from all surfaces, using soft-bristle brush.
(2)
Wipe finished surfaces and contacts, using a cloth moistened in solvent.
B.
Connector Cleaning
(1)
Wipe dust and dirt from connectors, using a lint-free cloth, moistened with sol-
vent.
C.
Underwater Locator Device (Beacon) Cleaning
All information for the ULB, including the testing and cleaning, is contained in the
L
−
3AR Underwater Locator Beacon CMM, p/n 165E5542
−
00.
The document reference is online, please check the correspondence between the online documentation and the printed version.