L3 comminications Trilogy ESI-1000, Руководство пилота

Страница: 26 / 48

ESI-1000
Pilot’s Guide 3-2
Operating Instructions
ALIGNMENT (Refer to Figure 3-2)
During alignment indicated airspeed, altimeter, and barometric pressure
begin displaying information while the attitude data is replaced with
an “Aligning” message along with a status bar and heading window (if
configured) has a red “X” displayed.
Figure 3-2: Alignment Screen (Not In Flight)
NoTE
While the indicator is aligning, the user may enter the Menu window to adjust
brightness levels, set the baro value, and view the status screen.
Within 3 minutes of application of power, the “Aligning” message
and status bar are replaced by attitude display elements. The
attitude aligns to less than or equal to 1° of vertical in pitch and roll.
If the indicator is configured for a magnetometer and receiving heading
information; within 3 minutes of application of power, the heading tape
and readout align to less than or equal to 2° of the heading reference.
•
•
SYSTEM IDENTIFICATION (Refer to Figure 3-1)
the system identification splash screen display’s the following information:
Company logo, software and
firmware version information.
After about 15 seconds the
indicator begins to align itself.
Figure 3-1: Example of System ID Screen