L3 comminications Trilogy ESI-1000, Руководство пилота

Страница: 13 / 48

ESI-1000
Pilot’s Guide 1-7
Description
Airspeed Digital Readout (refer to Figure 1-4)
The odometer styled IAS digital readout is located in the center of the
airspeed tape and displays the current aircraft speed in knots. The readout
has a viewing range of 40 to 400 kts for Part 23 aircraft and 20 to 350 kts for
Parts 27/29 rotorcraft.
Airspeed Awareness Color Bar (refer to Figure 1-4 and 1-5 a, b, & c)
The airspeed awareness color bar is located along the left side of the
indicated airspeed tape. The color bar indicates critical reference airspeeds
and operating ranges specific to the aircraft.
Part 23 Aircraft
Configuration Option:
Airspeed Awareness Color Bar may be configured
for V
ne
(cues - V
ne
, V
no
, V
fe
, V
s1
, V
s0
) or V
mo
(cues - V
mo
, V
fe
, V
s1
, V
s0
)
aircraft. In addition V
mc
and V
yse
may be set up for twin-engine applications
(2.0 software only) Cues V
fe
, V
s1
, V
s0
, V
mc
and V
yse
may be configured off.
Part 27/29 Rotorcraft
Airspeed Awareness Color Bar may be configured for V
ne
Power on,
V
ne
Power off and V
caution
(the start of the caution range for airspeed warning).
NOTE
For part 27/29 Rotorcraft the value of V
CAUTION
can be set
to the same value as V
NE
Power On thereby removing the
yellow color bar from the display.
INDICATED AIRSPEED
Airspeed Tape (refer to Figure 1-4)
The IAS tape is located on the left side of the display. The tape scrolls up
as aircraft speed decreases and scrolls down as aircraft speed increases.
The tape has a viewing range of 0 to 450 kts, and tape viewing span of 60
kts. Tick marks are shown every 10 kts and numbered digits shown every
20 kts.
Configuration Option: The tape background may be either clear or gray.