IES Series User Manual V. 1.0
10
Chapter 3 Hardware installation
3.1 DIN-Rail installation
Most industrial areas choose 35mm DIN-Rail installation. The DIN-Rail attachment plate is fixed to the rear panel
of the IES Switch when you take it out of the box. If you need to reattach the plate to the switch, make sure the
DIN-Rail bracket is situated towards the top.
• Insert DIN-Rail into the DIN-Rail slot of the IES Switch and rotate
downward as shown in Figure 1.
• Snap the Media IES Switch firmly into place onto the DIN-Rail as shown in Figure 3-1.
Fig. 3-1
