L-com Global Connectivity | 50 High St., West Mill, 3rd floor, Suite #30 | North Andover, MA 01845 | USA
© L-com, Inc. All Rights Reserved. L-com Global Connectivity and the L-com Logo are registered marks.
Toll Free Ordering and Technical Support: 1-800-343-1455
Copyright © This drawing is property of L-com Global Connectivity. All rights reserved.
Mounting the Amplifier
The HyperAmp HA2401RTGX Series Amplifiers are designed for outdoor mounting, close to the antenna.
Installed indoors near the radio, the DC Injector provides power to the amplifier via the coax cable. The
following shows how to mount the amplifier:
1. Attach the included L-Bracket to the amplifier as shown using two Pan Head screws. Note: the
tapped holes on the rear of the amplifier do not require sealing.
2. Mount the amplifier-bracket assembly to the mast as shown using the U-Bolt and included
hardware. To prevent water from leaking into the amplifier via the RF connectors, it is
recommended that the amplifier be mounted with the RF connectors facing down as shown.
3. Attach the required cables to the amplifier.
