![background image](http://html1.mh-extra.com/html/l-b-white/aw060/aw060_installation-and-service-manual_3182684029.webp)
Preventative
Maintenance
1. The aarea ssurrounding tthe hheater sshall bbe kkept cclear
and ffree ffrom ccombustible m
materials, ggasoline, aand
other fflammable vvapors aand lliquids.
2. Have your gas supplier check all gas piping annually
for leaks or restrictions in gas lines. Also, at this time
have your gas supplier clean out the sediment trap of
any debris that may have accumulated.
3. Regulators must be periodically inspected to make
sure the regulator vents are not blocked. Debris,
insects, insect nests, snow, or ice on a regulator can
block vents and cause excess pressure at the
appliance.
4. Regulators can wear out and function improperly.
Have your gas supplier check the date codes on all
regulators installed and check delivery pressures to
the appliance to make sure that the regulator is
reliable.
5. Check all wiring associated terminals and electrical
components within the heater for corrosion, frayed or
cut insulation, tight connections, etc. Repair or
replace as necessary.
6. Review all heater markings (i.e. wiring diagrams,
warnings, start-up, shut-down, troubleshooting, etc.)
at the time of maintenance for legibility. Make sure
none are cut, torn, or otherwise damaged. Any
damaged markings must be replaced immediately.
Contact the L.B. White Co. for replacement markings.
Dataplates, start-up and shut-down instructions and
warnings are available at no cost. A nominal charge
will be applied for wiring diagrams, and
troubleshooting markings.
August 1999
4.1-1
1
Periodic Inspection