K2_RM_EN_0.5
w w w . l - a c o u s t i c s . c o m
3 7 / 52
Stacking LA-RAK on K2-BUMP
PROCEDURE I.
Tools
Electric screwdriver with torque selector.
6 mm hex bit.
Wrench with 13 mm hex socket.
1.
Remove the nuts and bolts from
the K2-RACKMOUNT rails.
2.
Position and secure as many rails as necessary on the K2-BUMP.
1 LA-RAK
2 LA-RAK
3.
Secure the rails on the K2-BUMP.
Use the wrench with a 13 mm hex socket and the electric screwdriver. Set the torque to 5 N.m.
Before securing the side rails, make sure the frame pins are on the outside.
