manualshive.com logo in svg

L-Acoustics V-DOSC, Руководство оператора

L-Acoustics V-DOSC - профессиональная звуковая система для концертов и мероприятий. Для настройки и использования необходимо ознакомиться с инструкцией оператора. Вы можете бесплатно скачать руководство по эксплуатации на manualshive.com. Погрузитесь в мир качественного звука с L-Acoustics V-DOSC!

Поделиться
Скачать
background image

 

L-ACOUSTICS V-DOSC Manual Version 4 

6/29/2005 

Page 66 of 158 

 

Variable Curvature V-DOSC Array 

Since individual V-DOSC enclosures radiate a flat, isophasic wavefront it is possible to focus energy in 
a given direction and increase the SPL by reducing the angles between enclosures. Conversely, by 
increasing the angle between enclosures (up to a maximum of 5.5°) it is possible to lower the SPL in 
another direction. This is the basic principle that allows energy to be distributed uniformly throughout 
the audience and variable curvature arrays are used to adapt both the coverage of the system and the 
SPL distribution to match the specific audience geometry according to WST Condition #4.   

Shaping the VERTICAL ISOCONTOUR is the key to Wavefront Sculpture Technology. 

SOUNDVISION and ARRAY 2004 simulation programs allow the designer to shape the vertical 
isocontour of a V-DOSC array. The following sections give more complete details on variable 
curvature array design. 

2.3 V-DOSC COVERAGE MODELING USING ARRAY 2004 

L-ACOUSTICS has developed a fast, easy-to-use prediction spreadsheet named ARRAY 2004 that 
operates under Microsoft Excel. ARRAY 2004 can predict coverage for flat, constant curvature or 
variable curvature V-DOSC arrays. 

The first four worksheets represent vertical cut views (section elevations) of the audience in the XZ 
plane and show a pseudo-3D representation of the intersection of the site angles for each enclosure 
with the audience (these intersections are termed enclosure site angle impacts). The direction of each 
enclosure is calculated according to the user-input angles. All angles are referenced with respect to 
the site angle of the top enclosure which should be aimed at the rearmost part of the audience. 
Cutview sheets are used to shape the vertical isocontour of either V-DOSC or dV-DOSC arrays to 
match the audience area. 

Note: Cutview sheets V-ARRAY1 and V-ARRAY are used to simulate V-DOSC arrays (including dV-DOSC 
upfill and/or downfill enclosures) while Cutview sheets dV-ARRAY1 and dV-ARRAY2 are used for dV-DOSC. 

The H-ISOCONT sheet displays the horizontal isocontour (see Section 2.1) of all defined arrays 
projected onto a plan view of the audience area in the XY plane. 

The SUB ARC sheet is used to calculate delay taps based on the physical configuration of a given 
subwoofer array for electronic arc processing (see Section 3.4) 

The MTD XT SPACING sheet can be used to help calculate optimum spacing for a given throw 
distance for distributed sound reinforcement using MTD or XT coaxial loudspeakers.  

The ROOM DIM sheet can be used to help calculate XZ cutview parameters based on room 
measurements. Room dimension calculation utilities are also available in the V-ARRAY1, V-ARRAY2, 
dV-ARRAY1 and dV-ARRAY2 sheets. 

In general, all input data should be entered into the cells in black. Results are displayed in red. 

Note: In order to run ARRAY, Macro Security should be set at “medium” in Excel, i.e., from the main menu 
bar select: Tools / Macro / Security / Security Level = Medium 

Note: A complete description of ARRAY2004 is beyond the scope of this manual. For further information, 
participation in a V-DOSC Training Seminar is recommended. 

 

Содержание V-DOSC































































































































































Отзывы:

Нет отзывов

Похожие инструкции для V-DOSC

Sansui 210 Operating Instructions & Service Manual preview
210
Бренд: Sansui Страницы: 16
JEFF ROWLAND 535 Operational Manual preview
535
Бренд: JEFF ROWLAND Страницы: 14
NAD C700 Owner'S Manual preview
C700
Бренд: NAD Страницы: 16
NAD C700 Quick Setup Manual preview
C700
Бренд: NAD Страницы: 2
Inter-m PA-120A Operation Manual preview
PA-120A
Бренд: Inter-m Страницы: 20
McIntosh MC7100 Owner'S Manual preview
MC7100
Бренд: McIntosh Страницы: 20
Signal LCS652 Installation And Operating Instruction Manual preview
LCS652
Бренд: Signal Страницы: 16
Fender Champion 50XL Owner'S Manual preview
Champion 50XL
Бренд: Fender Страницы: 8
M-Audio TAMPA Quick Start Manual preview
TAMPA
Бренд: M-Audio Страницы: 2
One for All SV-9510 Instruction Manual preview
SV-9510
Бренд: One for All Страницы: 26
TC Electronic BH550 Manual preview
BH550
Бренд: TC Electronic Страницы: 25
Ocean Matrix OMX-LAS2 Instruction Manual preview
OMX-LAS2
Бренд: Ocean Matrix Страницы: 3
Suhr Badger 30 User Manual preview
Badger 30
Бренд: Suhr Страницы: 7
Whelen Engineering Company 295HFANC Installation Manual preview
295HFANC
Бренд: Whelen Engineering Company Страницы: 5
Inline IN3262D Operation Manual preview
IN3262D
Бренд: Inline Страницы: 11
ARX ZR series Owner'S Manual preview
ZR series
Бренд: ARX Страницы: 4
Diamond Amplification Heretic Owner'S Manual preview
Heretic
Бренд: Diamond Amplification Страницы: 20
Fender 400 Prol Pro Head Operating Instructions Manual preview
400 Prol Pro Head
Бренд: Fender Страницы: 20

Бренды по названию

Популярные бренды

Загрузить еще бренды