manualshive.com logo in svg

L-Acoustics V-DOSC, Руководство оператора

L-Acoustics V-DOSC - профессиональная звуковая система для концертов и мероприятий. Для настройки и использования необходимо ознакомиться с инструкцией оператора. Вы можете бесплатно скачать руководство по эксплуатации на manualshive.com. Погрузитесь в мир качественного звука с L-Acoustics V-DOSC!

Поделиться
Скачать
background image

L-ACOUSTICS V-DOSC Manual Version 4 

6/29/2005 

Page 29 of 158 

 

SIGNAL DISTRIBUTION AND CABLING 
(26)  CO6 CONTROL OUTPUT PANEL 

Control Output Panel for use with a single 2 in x 6 out (or 3 x 6) digital signal processor (DSP) 
to create a compact, modular drive rack or for mounting in RK12U amplifier racks along with 
amplifiers and a DSP unit for standalone master rack applications. DSP outputs are connected 
to the 6x female XLR patch bay on the rear side of the CO6 panel and then assigned to the 
front panel 19-pin CACOM connector to provide a 6 channel multi-conductor return snake 
system when used with DOM30 Cross Link cables. 

(27)  CO24 CONTROL OUTPUT PANEL

 

Control Output Panel for use with four 2 in x 6 out (or 3 x 6) DSPs to create a system drive 
rack: 1x 84 pin MASS connector; 4x 19 pin male CA-COM connectors; 24x female XLR inputs 
on the internal side; 1x male/female 4-pin XLR pair for amplifier remote control/monitoring. 
Used for connecting DSP outputs and amplifier remote control/monitoring to MC28100 MULTI 
return snake lines. 

(28)  MD24 MULTI DISTRO PANEL 

Stage distribution panel with 1x 84 pin MASS connector (for connection of MULTI return snake 
from FOH), 4x 19 pin male CA-COM (for distribution of Left-Left, Left, Right, Right-Right signal 
lines), 1x male/female 4-pin XLR pair (for distribution of amplifier remote control). 

(29)  MC28100 MULTI-CONDUCTOR CABLE 

24 pair multi-conductor return snake, 100 m (325 ft) length, fitted with 84 pin MASS connectors 
at each end (used for connecting CONTROL OUTPUT panel, typically located at FOH, to 
MULTI DISTRO panel for signal distribution to the amplifier racks) 

(30) PCMCIA 

CARDS

 

Contain OEM factory preset data for programming DSP units (PCM224V, PCM226V and 
PCM366V for XTA DP224, DP226 and BSS 366, respectively). Other approved DSPs are 
programmed via computer download of preset data (Lake Contour, BSS Soundweb). 

(31)  DOM2 AMP LINK CABLE 

6 pair multi-conductor cable, 2 m (6.5 ft) length, with 2x female 19 pin bayonet CA-COM 
connectors (for distributing signal from CO6 or MULTI DISTRO panels to amplifier racks and 
for linking AMP RACKS) 

(32)  DOM30 CROSS LINK CABLE 

6 pair multi-conductor cable, 30 m (100 ft) length, with 2x female 19 pin bayonet CA-COM 
connectors (for cross-stage connection from MULTI DISTRO panel to amplifier racks or for use 
as a return snake for smaller system configurations) 

(33) DOMP 

ADAPTER 

19 pin male/male CA-COM adapter (for connecting two AMP LINK or CROSS LINK cables 
when longer lengths are required) 

(34)  DOMM LINK BREAKOUT 

Multipair cable adapter with 1x female 19 pin CA-COM connector at one end, 6x male XLR 
connectors at the other (used as a LINK cable breakout for patching and testing purposes) 

(35) DOMF 

LINK-BREAKOUT

 

Multipair cable adapter with 1x female 19 pin CA-COM connector at one end, 6x female XLR 
connectors at the other (used as a LINK cable breakout for patching and testing purposes). 

Note: Parts nomenclature is as follows: 

   

DOM = DOSC Modulation 

              DOMP = DOSC Modulation Prolongateur (French for extender)

Содержание V-DOSC































































































































































Отзывы:

Нет отзывов

Похожие инструкции для V-DOSC

NAD 3120 Specifications preview
3120
Бренд: NAD Страницы: 3
dB MA-350.1D Owner'S Manual preview
MA-350.1D
Бренд: dB Страницы: 20
Ashly R-052510 Operating Manual preview
R-052510
Бренд: Ashly Страницы: 12
Optimus A-5120M2 Installation And Operating Instructions Manual preview
A-5120M2
Бренд: Optimus Страницы: 23
EarthQuake Cinenova 7 User Manual preview
Cinenova 7
Бренд: EarthQuake Страницы: 20
Inter-m PA-2100M Operating Manual preview
PA-2100M
Бренд: Inter-m Страницы: 20
TDT RA16PA Hardware Reference Manual preview
RA16PA
Бренд: TDT Страницы: 9
Phoenix Gold The One Limited Edition Amplifier Manual preview
The One Limited Edition Amplifier
Бренд: Phoenix Gold Страницы: 8
Focusrite iTracker One Pre User Manual preview
iTracker One Pre
Бренд: Focusrite Страницы: 15
Audiovox AMP-591A Owner'S Manual preview
AMP-591A
Бренд: Audiovox Страницы: 15
Ayre K-1x Owner'S Manual preview
K-1x
Бренд: Ayre Страницы: 24
Link electronics LEI-555 Specification Sheet preview
LEI-555
Бренд: Link electronics Страницы: 2
B&K VMR6 Owner'S Manual preview
VMR6
Бренд: B&K Страницы: 12
National Radio NCL 2000 Manual preview
NCL 2000
Бренд: National Radio Страницы: 31
PROEL AMP35E User Manual preview
AMP35E
Бренд: PROEL Страницы: 20
AUSTRALIAN MONITOR ES Series Operation Manual preview
ES Series
Бренд: AUSTRALIAN MONITOR Страницы: 16
Atlas TSD-PA10VG Owner'S Manual preview
TSD-PA10VG
Бренд: Atlas Страницы: 8
Beko HLV-800-3 Instruction & Operation Manual preview
HLV-800-3
Бренд: Beko Страницы: 14

Бренды по названию

Популярные бренды

Загрузить еще бренды