manualshive.com logo in svg

L-Acoustics V-DOSC, Руководство оператора

L-Acoustics V-DOSC - профессиональная звуковая система для концертов и мероприятий. Для настройки и использования необходимо ознакомиться с инструкцией оператора. Вы можете бесплатно скачать руководство по эксплуатации на manualshive.com. Погрузитесь в мир качественного звука с L-Acoustics V-DOSC!

Поделиться
Скачать
background image

L-ACOUSTICS V-DOSC Manual Version 4 

6/29/2005 

Page 18 of 158 

 

V-DOSC TRAINING AND QUALIFICATIONS 

V-DOSC is an innovative design based on a new approach to sound reinforcement that can provide 
predictable results to the extent that no other existing system can. However, achieving the desired 
result requires following a methodical procedure which may at first seem unusual to some sound 
designers and engineers. Hopefully, most of you will embrace this technology and approach V-DOSC 
with an open mind, excited by the possibilities that such a system allows. 

However, it can be “hard to teach an old dog new tricks”. For those of you in this category, the first 
step to take is to forget your experience with other systems and overcome your biases. Try to accept 
the fact that THIS SYSTEM BEHAVES DIFFERENTLY! Once you understand the procedures involved 
in working with V-DOSC, you will save time and - more importantly - obtain better, more predictable 
results.V-DOSC cannot be left in the hands of someone who has no experience with the system - 
even if that person has great skills and experience with respect to other systems. A V-DOSC operator 
needs specialized training and there are two levels of qualification:

 

QUALIFIED V-DOSC TECHNICIAN (QVT) 

The tasks of a “Qualified V-DOSC Technician” are: equipment preparation, array design using ARRAY 
or SOUNDVISION software (based on room dimensions that are either measured on-site or 
determined from architectural drawings), system installation (rigging, assembly, cabling, system focus, 
preset selection and drive rack configuration), system testing/tuning and assisting the FOH mix 
engineer. The QVT is a sound technician with demonstrated ability who has been chosen for his or 
her technical expertise by a given V-DOSC Network Partner. 

To be considered a Qualified V-DOSC Technician, the candidate must meet the following criteria: 

♦ 

Participated in a 3 day V-DOSC training session on theory and rigging 

♦ 

Recommended by a recognized CVE (see below) or an official V-DOSC Network representative  

CERTIFIED V-DOSC ENGINEER (CVE) 

The higher level of qualification is ''Certified V-DOSC Engineer'' or CVE. In addition to satisfying the 
mission statement for QVTs, the CVE has further expertise in the areas of: sound design and system 
measurement as well as extensive real world experience with V-DOSC. The CVE has a complete 
theoretical understanding of all WST-based systems (including V-DOSC, ARCS, KUDO, dV-DOSC) 
with a full grasp of the operating theories and principles behind all systems.  

Other requirements include: demonstrated fluency in ARRAY and SOUNDVISION software; use of 
advanced measurement tools (SMAART, WinMLS, MLSSA or equivalent) for system alignment and 
tuning; full understanding of the finer points of system focus – for example: tensioning ratchet straps 
using digital inclinometers, angle strap calibration; familiar with all preset libraries and software for all 
supported DSP units; familiar with room measurement procedures using laser rangefinders and 
inclinometers. 

The CVE is capable of recommending, endorsing and supervising QVTs during their apprenticeship 
period towards becoming a full CVE. In some cases, CVEs may also conduct V-DOSC training sessions 
provided that they have been factory-certified as a V-DOSC Trainer.  

To be included in the official list that is distributed to members of the V-DOSC Network, the CVE 
candidate must meet the following criteria: 

♦ 

Participated in a 3 day V-DOSC training session on theory and rigging 

♦ 

Recommended by a recognized CVE or an official V-DOSC Network representative  

♦ 

Known and certified by an official representative of L-ACOUSTICS 

The Qualified V-DOSC Technician and Certified V-DOSC Engineer are important representatives of 
the V-DOSC Network. While the V-DOSC Network provides V-DOSC on a rental basis, it is the 
QVT or CVE who accompanies the system at each installation to ensure that system performance is 
optimal. We hope that you will carefully follow the guidelines presented in this manual - it is in 
everyone’s best interest that V-DOSC is deployed correctly and optimally in the field. 

Содержание V-DOSC































































































































































Отзывы:

Нет отзывов

Похожие инструкции для V-DOSC

CableTronix CT-400 Installation Manual preview
CT-400
Бренд: CableTronix Страницы: 3
Eclipse XA1000 Owner'S Manual preview
XA1000
Бренд: Eclipse Страницы: 22
Ecleree MPA4-150 User Manual preview
MPA4-150
Бренд: Ecleree Страницы: 38
Hagerman PP12 Instruction Manual preview
PP12
Бренд: Hagerman Страницы: 7
Technalogix TAV-25 Instruction Manual preview
TAV-25
Бренд: Technalogix Страницы: 63
Genz Benz Shen Pro LT Owner'S Manual preview
Shen Pro LT
Бренд: Genz Benz Страницы: 8
Texas Instruments LM3886 Overture Manual preview
LM3886 Overture
Бренд: Texas Instruments Страницы: 24
Ericsson 1/KRB 101 1108 Installation, Operation And Maintenance Instructions preview
1/KRB 101 1108
Бренд: Ericsson Страницы: 34
Adcom GFA-555SE Brochure preview
GFA-555SE
Бренд: Adcom Страницы: 2
Rainbow iPaul BPM 245.000 Installation Manual preview
iPaul BPM 245.000
Бренд: Rainbow Страницы: 16
QRO Technologies HF-2000 Instruction Manual preview
HF-2000
Бренд: QRO Technologies Страницы: 22
SpeakerCraft Bass Power 250 Owner'S Manual preview
Bass Power 250
Бренд: SpeakerCraft Страницы: 8
Lab 12 suono Owner'S Manual preview
suono
Бренд: Lab 12 Страницы: 9
Melchioni 550111012 Manual preview
550111012
Бренд: Melchioni Страницы: 28
Alphard M1500D Owner'S Manual preview
M1500D
Бренд: Alphard Страницы: 20
Diamond Amplification Heretic Owner'S Manual preview
Heretic
Бренд: Diamond Amplification Страницы: 20
Kramer VP-2L User Manual preview
VP-2L
Бренд: Kramer Страницы: 12
ESX Crunch GTO 2120 User Manual preview
Crunch GTO 2120
Бренд: ESX Страницы: 32

Бренды по названию

Популярные бренды

Загрузить еще бренды