Rigging procedures
Rigging procedures
Tools
Before rigging this product, make sure all the tools listed are available. References are given for FACOM
®
products in this
table. Other manufacturers can be used.
name
reference
distributor
set of 6-point 1/4" sockets
RL.NANO1 / R.360NANO
FACOM
torque screwdriver (2 - 10 N.m)
A.404
FACOM
Wall-mounting with Soka-onW
type of deployment
wall-mounting
rigging accessories
Soka-onW, including:
• 2 surface-mounting plates
• 2 M6x35 Torx screws
• 2 silent blocks
• 4 spacers
additional material
4 compatible screws and anchors
torque screwdriver
T30 Torx bit
tools
T20 Torx bit
min. number of operators
1
Fasteners for wall-mounting
Secure the rigging element with four round or pan head M6 screws.
Select screw length and anchors applicable to the wall properties.
Soka owner's manual (EN) version 1.0
23
