L-Acoustics S Series Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 80

background image

Safety

Risk of falling objects

Verify that no unattached items remain on the product or assembly.

Risk of tipping

Remove all rigging accessories before transporting a product or an assembly.

Take into account the wind effects on dynamic load.

When a loudspeaker assembly is deployed in an open air environment, wind can produce dynamic stress to the

rigging components and suspension points.
If the wind force exceeds 6 bft (Beaufort scale), lower down and/or secure the product or the assembly.

Intended use

This system is intended for use by trained personnel for professional applications.

As part of a continuous evolution of techniques and standards, L-Acoustics reserves the right

to change the specications of its products and the content of its documents without prior

notice.

www.l-acoustics.com

on a regular basis to download the latest document and software updates.

Long term exposure to extreme conditions may damage the product.

For more information, refer to the

Products weather protection

document, available on the website.

Read the maintenance section of this document before servicing the product.

Contact L-Acoustics for advanced maintenance.

Any unauthorized maintenance operation will void the product warranty.
Before sending a product to L-Acoustics for maintenance, save all user presets to les using LA Network Manager.
This marking indicates that this product should not be disposed of with other household waste throughout the

EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it

responsibly to promote the sustainable reuse of material resources. To return your used device, please use the

return and collection systems or contact the retailer where the product was purchased. They can take this product

for environmentally safe recycling.

6

Syva owner's manual (EN) version 1.0

«
...
4
5
6
7
8
...
»

Содержание S Series

















































































Отзывы:

Нет отзывов

Похожие инструкции для S Series

Architectual AQ215

Бренд: Martin Audio Страницы: 1

Бренд: DAPAudio Страницы: 16

LA SPHERE - DATASHEET 2

Бренд: CABASSE Страницы: 8

Бренд: Turbosound Страницы: 13

Бренд: Aitkenson Страницы: 4

Sonic Mobil 160

Бренд: Hama Страницы: 20

Бренд: Bijela Страницы: 10

AcousticDesign AD-C4T-WH

Бренд: QSC Страницы: 4

Бренд: Dali Страницы: 38

Бренд: Extron electronics Страницы: 51

Бренд: Daewoo Страницы: 2

Бренд: Xblitz Страницы: 40

Бренд: iLive Страницы: 12

Бренд: Party Light & Sound Страницы: 21

Бренд: B&W electronics Страницы: 8

Бренд: König Electronic Страницы: 24

Бренд: Clas Ohlson Страницы: 4

Бренд: Pyle Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды