L-Acoustics LA-RAK, Руководство пользователя

Страница: 33 / 44

LARAK_UM_EN_1.0 w w w . l - a c o u s t i c s . c o m 31
31 31
31
6.7.3 Internal digital connection
The LA-PANEL rear side features two L-NET RJ45 I/O sockets with built-in PCB to connect the three LA8 of an LA-
RAK to the L-NET network.
Figure 27: LA-PANEL and LA8 rear views
Cable replacement procedure
When leaving the factory the LA-PANEL features four CAT5e U/FTP cables. If cable replacement is needed follow the
procedure below (see also Figure 28):
a. Remove the LA-PANEL from the LA-RAK by removing the four front Pozidriv
®
screws.
b.
Unscrew the back protecting plate by removing the four Torx
®
screws.
c. Remove the old cables and install new ones.
Check that the connector bodies of the new cables are
short enough to allow putting the plate back in place.
d. Put the plate and Torx
®
screws back in place (torque to 1.5 N.m/14 in.lb
f
).
e.
Put the LA-PANEL and Pozidriv
®
screws back in place into the LA-RAK (torque to 3 N.m/27 in.lb
f
).
Figure 28: Replacing digital cables on the LA-PANEL rear side
!
CAUTION
b. d.
c.
IN OUT
L-NET
L-NET
IN OUT