LA
LA
LA
LA----RAK
RAK
RAK
RAK
T
T
T
TOURING RACK
OURING RACK
OURING RACK
OURING RACK
u
u
u
user
ser
ser
ser m
m
m
manual
anual
anual
anual
VERSION 1.0
LARAK_UM_EN_1.0
w w w . l - a c o u s t i c s . c o m
16
16
16
16
6
6
6
6
INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION
6.1
Mounting components inside the LA-RAK
The
9U inner frame
(see Figure 4) is for mounting components to both front and rear faces:
•
The LA-PANEL and optional switches mount to the front face using four screws and washers each.
•
The LA-POWER mounts to the rear face using four screws and washers.
•
Each LA8 mounts to both front and rear faces using eight screws and washers.
During transport or while on tour it is essential that the LA8 controllers are rear supported
in addition to the front panel mounting. Use the rear rack support brackets provided with
each LA8 or the LA-RAK optional spacers (see references in section 7.3).
6.2
Shipping the LA-RAK
The
removable dolly board
(see Figure 9) is for shipping a vertical array of up to two LA-RAK. It secures to the
bottom LA-RAK using two
coupling bars
(see section 6.3).
It is recommended to use the removable dolly board for shipping the LA-RAK.
A maximum of
two LA-RAK
can ship onto
one dolly board
.
6.3
Stacking or flying the LA-RAK
The LA-RAK features four fully integrated rigging rails on top and bottom faces as well as four stacking runners which
mate with four runner guides. These are for assembling several LA-RAK in flown or stacked configurations such as:
•
Stacking a vertical array of up to 3 LA-RAK onto one
dolly board
.
•
Flying a vertical array of up to 4 LA-RAK underneath the
L-ACOUSTICS
®
LA-RAK BUMP
flying frame
or onto the
L-ACOUSTICS
®
K1-BUMP
flying frame.
6.3.1
Stacking procedure
All along the procedure:
•
Strictly follow the sequence of the successive steps.
•
Systematically ensure that each spring-loaded safety is in locking position.
1.
Put a first LA-RAK at the stacking location.
!
WARNING
!
WARNING
!
CAUTION
Содержание LA-RAK
Страница 2: ......
