L-Acoustics KIVA, Руководство пользователя

Страница: 16 / 48

KIVA
WST SYSTEM
Rigging Procedures and Accessories
VERSION 1
KIVA_RM_ML_1 w w w . l - a c o u s t i c s . c o m 14 en
Once the assembly is raised it can now accommodate additional enclosures. In the following example a KIVA enclosure
is hung under the initial KIBU+2 KILO constructed previously:
1. Bring the assembly to a comfortable height which will allow the user to attach the remaining enclosures to the
bottom of the basic assembly.
Make sure that no one is standing under or in close proximity
to the system when it is being raised in the air.
2. While another person stabilizes the system to keep it from swinging, bring the front part of a KIVA enclosure behind
and under the assembly and attach the KIVA enclosure to the bottom of the above KILO already suspended. (See
section 6.1.1 steps 2 a. & b. of the procedure
and the warning statement ).
Figure 13: Attaching KIBU+2KILO assembly to KIVA
3. Pull back the spring-loaded pin on the KIVA in order to release the angle bar located in the slot housing in back of the
enclosure, and leave it loosely hanging.
4. Pull back the spring-loaded pin from located in the back of the KILO enclosure and insert the angle bar from the
KIVA into the slot located in the middle of the KILO.
5. Align the reference mark on the angle bar of the KIVA with the angle index number on the corresponding to the
predetermined angle shown in the SOUNDVISION report file.
The spring-loaded pin will re-engage automatically into its initial position. If this does not happen it will be necessary
to change the positioning of the angle bar in the slot of the KILO until the pin locks into place, securely fastening the
angle bar of the KIVA to the KILO above.
!
WARNING