L-Acoustics A15 Focus Скачать руководство пользователя страница 8

Страница: 8 / 98

Introduction

How to use this manual

The A15 owner's manual is intended for all actors involved in the system design, implementation, preventive and

corrective maintenance of the A15 system. It must be used as follows:

Read the technical description for an overview of all system elements, their features, and their compatibilities.

•

Electro-acoustical description

(p.12)

•

Rigging system description

(p.20)

Prepare the system conguration. Consider the mechanical limits and the available acoustical congurations.

•

Mechanical safety

(p.43)

•

Loudspeaker congurations

(p.45)

Before rigging the system, perform mandatory inspections and functional checks.

To deploy the system, follow the step-by-step rigging instructions and refer to the cabling schemes.

•

Rigging procedures

(p.49)

•

Connection to LA amplied controllers

(p.78)

As part of a continuous evolution of techniques and standards, L-Acoustics reserves the right to

change the specications of its products and the content of its document without prior notice.

Please

check

www.l-acoustics.com

on a regular basis to download the latest document and software updates.

Contact information

For information on advanced corrective maintenance:

• contact your Certied Provider or your L-Acoustics representative
• for Certied Providers, contact the L-Acoustics customer service:

[email protected]

Symbols

The following symbols are used in this document:

This symbol indicates a potential risk of harm to an individual or damage to the product.
It can also notify the user about instructions that must be strictly followed to ensure safe installation or operation of

the product.
This symbol noties the user about instructions that must be strictly followed to ensure proper installation or

operation of the product.

This symbol noties the user about complementary information or optional instructions.

A15 owner's manual (EN) version 1.2

Содержание A15 Focus



































































































Результаты поиска

Содержание A15 Focus

Отзывы:

Похожие инструкции для A15 Focus

Бренды по названию

Популярные бренды

L-Acoustics A15 Focus, Руководство пользователя

Результаты поиска

Содержание A15 Focus

Отзывы:

Похожие инструкции для A15 Focus

Бренды по названию

Популярные бренды