Multi-Image Splicing Processor
5
Note:
All output displays
are the same.
Turn knob to select output
Click “OK” to adjust
Vertical
Size:
1080
Vertical
Mosaic
Horizontal Size:
1920
OUT
Horizontal
Mosaic
Copy Output
Confirm
Select by finger key
Cancel
×1
×10
×100
OUT1
OUT2
Screen Parameters
3.2 Debugging Procedure
Step 1:
Click “MENU” to enter into main menu interface and click “Device
Mode” to select splicing mode: copy mode, horizontal mosaic, and vertical mosaic.
Note: Copy Mode: all output contents are consistent; horizontal mosaic: contents
of all outputs are arranged horizontally; vertical mosaic: contents of all outputs are
arranged vertically;
Step 2:
select suitable splicing mode and click “OK”; get back to main menu
interface to select “Screen parameter” and enter into its setting interface. Set loaded
screen point of each output interface and click “Confirm” after inputting, and then
screen splice is finished.
Note: there are two ways for number input:
(1)Adjust by rotate knob. Step length can be adjusted by “×1”“×10”“×100”, for
instance, “×100”means that number of rotate knob increases by 100 each time.
Device
M
ode
