Kystar KS910P, Руководство по эксплуатации

Страница: 9 / 29

Multi-Image Splicing Processor
5
3. Device Debugging
3.1 Device Connection
Device connection could be divided into three parts: power connection, signal connection and
control connection (used for software debugging).
Power connection: device power supply. Connection method: connect power cord to power
plug.
Signal connection: the method transferring signal from signal source to LED large screen.
Connection method: signal source (e.g.: computer)→Mosaic Processor→Transmitting
card→Large screen.
Control connection: connect computer with device control port and debug device connection
method. There are three connection methods:
（
1
）
Connect 100 mbit network control port with splicer LAN1 port, which can set device
software.
（
2
）
Connect computer gigabit network port with splicer LAN2 port, which can not only set
device but also echo signal source image.
（
3
）
Connect one crystal head of serial port line which is randomly donated by device with
splicer COM port, and plug DB9 into computer serial port. Any of the three methods realizes
device software control.
Connection diagram is as follows:
Display
Computer
Mosaic
Transm
itting