KYstar KS9000 plicing processing platform
Multi-Screen Splicer Processor
17
“OK” to return to the operating area.
2. Window setup
After the above-mentioned settings are completed, the whole large screen (the
grey area) has been joined, but to achieve display on the large screen, a window
needs to be set up; here we take 2 rows and 3 columns as examples to show how to
set up a new window.
Hold the left mouse button to drag in the operating area, release it when a
rectangle has been drawn and a new window will have been set up (or click
“OpenWin”).
The window top bar is gray and blue highlighted; when the window is blue, it
indicates that this window is selected and direct operation is available; when the
window is gray, it indicates that the window is not selected, and if operations are
needed, you should left-click this top bar and then you can set the window
parameters until the bar has become blue. The states of “Selected” and “Not
Selected” are illustrated in the figure below:
