Kystar K2, Руководство пользователя

Страница: 25 / 34

2
4.2 Vertical splicing
For example: P3 display, the large screen resolution is 1280 wide and 4096 high. It is required
that the large screen can display one screen or four screens, and each screen is a different signal
source. The client requires a point-to-point display in order to show the effect.
4096
1280
1024
1024
1024
1024
1280
Preliminary preparation: 4K dual graphics card with a custom resolution of 1280 × 2048
graphics card for vertical splicing. Desktop computer with DVI output port, laptop computer with
HDMI output port, laptop computer with VGA output port, high-definition camera with SDI output
port. Input all communication input signals to the corresponding input ports of the splicer.
Quick commissioning:
1. Device mode: Select real-time mode.
2. splicing blur: Select vertical splicing.
3. Output resolution: select 1280 × 1024.
4. Screen parameters: 4 output ports are horizontal size 1280 vertical size 1024.
5. Screen layout: Select layout two. MAIN screen and PIP-1 screen select the corresponding
signal sources DP-1 and DP-2. Enter the corresponding layer setting interface to adjust the image
size and position corresponding to each layer
6. Single screen point-to-point display debugging is completed. Select the "MENU" menu key
to return to the main menu, select the “Shift”+“
Save
Preset
”key to enter the save preset interface and
confirm the save to mode one.
7. Select the "MENU" menu key to return to the main menu and select screen layout layout 4.
Enter the corresponding layer setting interface to adjust the image size and position corresponding
to each layer. Select the “Shift”+“
Save
Preset
” button to save to Mode 2.
8. Equipment debugging is completed.
Quick commissioning:
1. Device mode: Select real-time mode.
2. splicing blur: Select vertical splicing.
3. Output resolution: select 1280 × 1024.
4. Screen parameters: 4 output ports are horizontal size 1280 vertical size 1024.
5. Screen layout: Select layout two. MAIN screen and PIP-1 screen select the corresponding
signal sources DP-1 and DP-2. Enter the corresponding layer setting interface to adjust the image