Kyocera Taskalfa Pro 15000c, Руководство по эксплуатации

Страница: 437 / 576

15-58
Setting up from System Menu > Security Settings
System Stamp
[ System Menu/Counter ] key > [ Security Settings ] > "System Stamp"
Printing Jobs
[ System Menu/Counter ] key > [ Security Settings ] > "System Stamp" [ Printing Jobs ]
Configure settings for stamps when a document is printed.
After configuring the setting, return to the Copying Functions or Custom Box (Printing a Document) screen from System
Menu, and select the [
Reset ] key.
Item Description
Text Stamp Text Stamp Select whether to print a text stamp on all sending jobs.
Value : Off, On
NOTE
When [ On ] is selected, the Text Stamp settings cannot be changed
when sending.
Edit Text Select a text string to be stamped from templates, or enter a
maximum of 32 characters for the text string.
NOTE
Templates that have been set will appear. For details on registering
templates, refer to the following:
Text (Text Stamp) (page 15-35)
Stamp Method Select the text stamp method.
Value : Each Print Page, Each Original Page
Position Position Set the text stamp position.
Value : Top Left, Top Middle, Top Right, Middle Left, Center,
Middle Right, Bottom Left, Bottom Middle, Bottom Right
NOTE
Specify the detailed stamp position using numeric values, and to set
the stamp angle.
Nudge Set the nudge.
Value :
Top/Bottom: -10 to 10 mm (in 1 mm increments)
Left/Right: -10 to 10 mm (in 1 mm increments)
Back Page Set the text stamp position when a page number is placed on the
back side of the paper in duplex printing.
Value : Same as Front Page, Mirror Front Page
Rotation Set how many degrees you want to rotate the stamp from the left or
right. You can enter the angle from 0 to 359 degrees.