Kyocera TASKalfa 420i, Руководство по обслуживанию

Страница: 220 / 508

2KR/2KS
1-4-62
1-4-6 Send error code
(1) Scan to SMB error codes
Code Display
Remarks
Causes Check procedures/corrective measures
1102 Error: User/Password or
Shared Name/Folder Name Domain name is not entered. Enter the user name with the form of either
[Domain¥User], [Domain/User] or
[Domain@User].
Assign disable user/pass-
word. Enter the correct user name/password.
Assign the user who is not
allowed to access to folder. Enter correct user name/password.
Check the access limit of destination folder.
Assign disable shared name. Enter the correct shared name.
Check if the prohibited letters below are
used to shared name.
@( )!&#$%^~[ ]`
Host name error. Check if the prohibited letters are used to
shared name.
“&’( )|`;<>
1103 Error: Pathname or File
Name Domain name is not enter Enter the user name with the form of either
[Domain¥User], [Domain/User] or
[Domain@User].
Connect to the folder which is
not permitted for reference/
writing. Enter correct user name/password.
Check the access limit of destination folder.
Assign disable folder path. Enter correct folder path.
1105 Error: Not support protocol SMB Protocol is set to OFF. Check ON in the [Scanner]-[SMB] screen in
COMMAND CENTER.
2101 Error: Can not connect Enter the disable host name/
IP address. Enter the correct host name or IP address.
Assign the wrong port num-
ber. Enter the correct port number.
Network is not connected. Check if the server is operating properly.
Check the network connection (cable. net-
work condition within LAN, etc.).
2103 Error: Response wait with
timeout The server is unable to com-
municate. Check if the server is operating properly.
2201 Error: Network transfer Error occurs on the network. Check the network connection (cable. net-
work condition within LAN, etc.).
2203 Error: Response wait with
timeout Response is not returned
from the server above speci-
fied time. Check the network connection (cable. net-
work condition within LAN, etc.).
9181 Error: Page max count over The number of pages of a
send file exceeded 999
pages. Set the number of pages as 999 or less.