Bluetooth Headset
KYO110
QuickStart Guide
A complete user guide can be found at
http://www.kyocera-wireless.com/support
.
82-R2010-1ES, Rev. 001
G
ETTING
TO
KNOW
YOUR
B
LUETOOTH
H
EADSET
KYO110
C
HARGING
THE
B
ATTERY
Note:
The battery must be charged for at least 2 hours prior to use. Once
charged, it provides up to 6 hours of talk time. A tone will sound when the
battery is low.
a.
Insert one end of the AC Charger into the
AC Charger Jack
on
your headset.
b.
Plug the opposite end of the AC Charger into a wall outlet.
Note:
The
LED Indicator
will illuminate red while the headset is
charging, and turn off when charging is complete.
c.
Unplug the AC Charger from the headset when charging
is complete.
P
AIRING
THE
H
EADSET
WITH
Y
OUR
C
ELL
P
HONE
Note:
Ensure your headset is powered off, and your cell phone is
powered on.
a.
Press and hold the
Multi Function Button
for 6 seconds until the
LED Indicator
flashes red and blue. A tone will sound indicating your
headset is in pairing mode.
b.
Activate the Bluetooth connection from your cell phone. Execute the
search function to search for Bluetooth devices. When the search
completes, a list of supported devices will be displayed on your cell
phone screen.
Note:
The headset will not be detected unless first placed in
pairing mode.
c.
To start the pairing process, select
KYO110
from the device list.
d.
When prompted select
0000
as the passkey.
Note:
Depending on your cell phone, pairing operations may
execute automatically. Please consult your phone user guide if
specific pairing operations are needed.
P
ERFORMING
B
ASIC
F
UNCTIONS
P
OWER
O
N
Press the
Multi Function Button
for 4 seconds.
The LED Indicator
will
flash blue.
P
OWER
OFF
Press the
Multi Function Button
for 5 seconds. The
LED Indicator
will
flash red.
V
OLUME
A
DJUST
Press the
Volume Adjust Button
up or down to increase or decrease
call volume.
A
NSWER
A C
ALL
/ E
ND
A C
ALL
Press the
Multi Function Button.
R
EJECT
A
N
I
NCOMING
C
ALL
Press and hold the
Multi Function Button
for 3 seconds.
T
RANSFER
A
C
ALL
(headset to cell phone / cell phone to headset)
Press the
Multi Function Button
for 3 seconds.
R
EDIAL
L
AST
N
UMBER
Press the
Multi Function Button
2 times. A high tone will sound once a
connection is established.
V
OICE
D
IALING
(
phone dependant feature)
To activate voice dialing, press and hold the
Multi Function Button
for 3
seconds. To cancel voice dialing, press and hold the
Multi Function Button
for 3 seconds.
Note:
Review your cell phone user guide for detailed voice
dialing instructions.
FCC N
OTICE
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
C
AUTION
The user is cautioned that changes or modifications not expressly approved by the party responsible for
compliance could void the warranty and users’ authority to operate the equipment.
N
OTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/
TV technician for help.
F
CC
R
ADIATION
E
XPOSURE
S
TATEMENT
To comply with the FCC RF exposure compliance requirements, this device must not be
co-located or operating in conjunction with any other antenna or transmitter.
1
AC C
harger
J
ack
2
E
arhook
3
M
ulti
F
unction Button /
LED
I
ndicator
4
M
icrophone
5
V
olume
A
djust Button
6
E
arpiece
Kit Contents
: Bluetooth Headset
KYO110
, AC Charger,
Quick Start Guide
, and Warranty Card.
Kyocera is a registered trademark of Kyocera Corporation. The Bluetooth word mark and logos
are owned by the Bluetooth SIG, Inc. and any use of such marks by Kyocera Wireless Corp. is
under license. All other marks are held by their respective owners.
Copyright © 2007, 2008 Kyocera Wireless Corp. All rights reserved.
82-R2010-1ES_rev001.fm Page 1 Monday, November 19, 2007 7:41 AM
