Model KS7
KS7
MULTICRYSTAL
PHOTOVOLTAIC
MODULE
TYPICAL OUTPUT 7 Wp
HIGHLIGHTS OF KYOCERA PHOTOVOLTAIC MODULES
Kyocera´s advanced cell processing technology and automated production facilities have produced a highly
efficient multicrystal photovoltaic module.
These cells are encapsulated between a tempered glass cover and an EVA pottant with PVF back sheet to
provide maximum protection from the severest environmental conditions.
The entire laminate is installed in an anodized aluminium frame to provide structural strength and ease of
installation.
APPLICATIONS
Microwave / radio repeater stations
Pumping systems for irrigation, rural
Electrification of villages in remote areas
water supplies and livestock watering
Medical facilities in rural areas
Aviation obstruction lights
Power source for summer vacation homes
Cathodic protection systems
Emergency communication systems
Desalination systems
Water quality and environmental data monitoring
Recreational vehicles
systems
Railroad signals
Navigation lighthouses, and ocean buoys
Sailboat charging systems
SPECIFICATIONS
Electrical Specifications Physical Specifications
Maximum Power
7 Watts
Length
304 mm
Maximum Power Voltage
16.9 Volts
Width
352 mm
Maximum Power Current
0.42 Amps
Depth
22 mm
Open Circuit Voltage
21.5 Volts
Weight
1.8 kg
Short-Circuit Current
0.44 Amps
Note: The electrical specifications are under test conditions of Irradiance of
1 kW/m
2
, Spectrum of 1.5 air mass and cell temperature of 25ºC
SOLARTEC S.A.
Méjico 2145 – 1640 Martínez
Buenos Aires – Argentina
Tel: 54-11-4836-1040
Fax: 54-11-4836-0808/1381
www.solartec.com.ar
The contents of this catalogue are subject to change without prior notice for further improvement.
