Kyocera KM-2810, Руководство по обслуживанию

Страница: 33 / 180

2H9
1-3-9
U034
Adjusting the print start timing
Description
Adjusts the leading edge registration or center line.
Purpose
Make the adjustment if there is a regular error between the leading edges of the copy image and original.
Make the adjustment if there is a regular error between the center lines of the copy image and original.
Method
1. Press the start key.
2. Select the item to be adjusted. The setting screen for the selected item is displayed.
Adjustment: Leading edge registration adjustment
1. Select the item to be adjusted.
*: Setting the difference value from reference value
2. Press the system menu key.
3. Press the start key to output a test pattern.
4. Press the system menu key.
5. Change the setting value using the cursor left/right keys.
For output example 1, decrease the value. For output example 2, increase the value.
Figure 1-3-1
6. Press the start key. The value is set.
Caution
Check the copy image after the adjustment. If the image is still incorrect, perform the following adjustments in
maintenance mode.
Maintenance
item No.
Description
Display Description
LSU OUT TOP Leading edge registration adjustment
LSU OUT LEFT Center line adjustment
Display Description Setting
range Initial
setting Change in
value per step
TOP Adjustment of reference value
0 to 1180
541 1 dot
MP TRAY Paper feed from MP tray* -70 to 70 0 1 dot
CASSETTE Paper feed from cassette* -70 to 70 0 1 dot
DUPLEX Duplex mode (second side)* -70 to 70 0 1 dot
Correct image Output
example 1
Output
example 2
Leading edge registration
U034
U066
(P.1-3-15)
U071
(P.1-3-19)