Kyocera ECOSYS P4140dn, Руководство по эксплуатации

Страница: 196 / 276

9-11
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
ID Card Settings
If ID card authentication is enabled, select the authentication type.
1
Display the screen.
1
[ Menu ] key > [ ▲ ] [ ▼ ] key > [ User/Job Account ] > [ OK ] key
2
[ ▲ ] [ ▼ ] key > [ User Login Set. ] > [ OK ] key
2
Configure the settings.
[ ▲ ] [ ▼ ] key > [ ID Card Settings ] > [ OK ] key
The following settings can be selected.
NOTE
This functions appears when the Card Authentication kit is activated.
Card Authentication Kit(B) "Card Authentication Kit" (page 11-3)
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [
Login ]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Login User Name: 4000
Login Password: 4000
Item Descriptions
Key Login When ID card authentication is enabled, select whether or not login by
keyboard is allowed.
Value : Permit, Prohibit
Additional Auth.
*1
*1 This function does not appear when the server type is set to [ NTLM ] or [ Kerberos ] in "Network
Authentication".
Select whether or not to require password entry after authenticating by ID
card.
Value : Off, Use Password, Use PIN