Kyocera ECOSYS MA2100cfx, Руководство по эксплуатации, Страница: 286 / 408

9-3
User Authentication and Accounting (User Login, Job Accounting) > Enabling User Login Administration
Enabling User Login Administration
Select one of the following authentication methods:
1
Display the screen.
1 [ System Menu/Counter ] key > [▲] [▼] key > [ User/Job Account ] > [ OK ] key
2 [▲] [▼] key > [ User Login Set. ] > [ OK ] key
2
Configure the settings.
1 [▲] [▼] key > [ User Login ] > [ OK ] key > [▲] [▼] key >
[ Local Authentic. ] or [ Netwk Authentic. ] > [ OK ] key
When selecting [Netwk Authentic.]
1 [▲] [▼] key > [ NTLM ], [ Kerberos ] or [ Ext. ] > [ OK ] key
2 Enter the host name (64 characters or less) for the Authentication Server and select the
[ OK ] key.
3 Select the domain name for the Authentication Server, and select the [ OK ] key.
If the domain has not been set, select the number where "----------------" is displayed and select
[ Menu ]. Select [ Edit ] and select the [ OK ] key then enter the domain name (in 256 characters or less).
Select the [ OK ] key and the domain will be registered.
To edit or delete a domain name that has already been registered, select that domain name and
select [
Menu
].
Item Descriptions
Local Authentication User authentication based on user properties on the local user list stored in the
machine.
Network Authentication User authentication based on Authentication Server. Use a user property stored
in Authentication Server to access the network authentication login page.
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [ Login ]. For this, you need to login with administrator privileges.
The factory default login user name and login password are set as shown below.
Login User Name: 2100
Login Password:
2100
NOTE
Select [ Off ] to disable user login administration.
NOTE
Up to 10 domain names can be registered.