Kyocera Ecosys M812cidn, Руководство по эксплуатации

Страница: 234 / 526

5-31
Operation on the Machine > Destination Operations
Dest. Check before Send (8-24)
1
Select [ ] or [ ] to check all destination.
[Selecting [ ] shows detailed information about the selected destination.
To delete a destination: Select the destination you want to delete. > [ ]> [Yes]
To add the destination: select [Cancel] and then return to the destination screen.
2
Select [Check].
Recall
Recall is a function allowing you to send the last entered destination once again. Or if you want to send to the same
destination. In cases such as this, you can select [Recall Destination] and recall the last destination to which you sent a
fax back into the destination list.
1
Select [Recall].
This displays the destination of the last send.
2
Press the [Start] key.
Transmission begins.
NOTE
Be sure to confirm all destination by displaying them on the touch panel. You cannot select [Check] unless you
have confirmed all destination.
NOTE
When the last sending included FAX, folders and E-mail destinations, they are also displayed. Add or delete
destinations as required.
NOTE
• When [On] is selected in [Dest. Check before Send], a destination confirmation screen is displayed when you
press the [Start] key.
Confirmation Screen of Destinations (5-30)
• Recall information is canceled in the following conditions.
- When you turn the power off
- When you send a next image (new recall information is registered)
- When you log out
Destinations Check
10:10 Check the destinations and press [Check].
Menu
1/2
1234567890
2345678901
3456789012
4567890123
A OFFICE
B OFFICE
C OFFICE
D OFFICE
Cancel Check