Kyocera ECOSYS M3145dn, Руководство по эксплуатации

Страница: 233 / 423

6-22
Using Various Functions > Functions
Continuous Scan
Scans a large number of originals in separate batches and then produce as one job.
Originals will be scanned continuously until you select [ End Scan ].
( Value : [ Off ] / [ On ])
Job Finish Notice
Sends E-mail notice when a job is complete.
Users can be notified of the completion of a job while working at a remote desk, saving the time spent waiting beside the
machine to finish.
File Name Entry
Adds a file name.
Additional information such as job number and date and time can also be set. You can check a job history or job status
using the file name, date and time, or job number specified here.
Enter the file name (
up to 32 characters)
, and select the [ OK ] key.
To add date and time, select [ Date ] and the [ OK ] key. To add job number, select [ Job No. ] and the [ OK ] key. To add
both, select [ Job No. + Date ] or [ Date + Job No. ] and the [ OK ] key.
NOTE
PC should be configured in advance so that E-mail can be used.
Command Center RX (page 2-44)
E-mail can be sent to a single destination.
Item Description
Off Disables the function.
JobFinished Only Enter E-mail address directly. Enter the address (up to 128 characters) and select the [ OK ] key.
Fin.+Interrupted
Copy
Send
Scan to
USB
1~10
1
1~30
1
11~20
11
21~30
21
Copy
Print from
Box
Print from
USB
Send
Scan to
USB
Copy
Print from
Box
Print from
USB
Send
Scan to
USB