Kyocera ECOSYS FS-6950DN, Руководство по обслуживанию, Страница: 99 / 128

2F7-2
1-6-5
(3) Downloading the firmware from the USB memory
The procedure below provides how to download firmware from a memory card.
Note that you can’t download both the system and engine firmware at a time.
1. Turn printer power off.
2. Connect the USB memory to the PC.
3. Copy the firmware file to the root directory of
the USB memory.
4. Remove the USB memory from the PC and
then insert the USB memory into the
printer's USB memory slot.
Figure 1-6-9
5. Turn printer power on.
6. When message display (1) is displayed to
detect firmware in the USB memory.
7. Message display (2) is displayed during
downloading.
8. When message display (3) is displayed to
indicate downloading is finished.
9. Turn printer power off.
10. Remove the USB memory from USB mem-
ory slot.
11. Turn printer power on.
12. Confirm that message display (4) is dis-
played after warm-up.
13. Print the status page. Print the status page
to check that the firmware version has been
updated.
Figure 1-6-10
US B m e m ory slot
US B m e m ory
( 2 )
( 1 )
( 4 )
Ready
Supervisor mode
USB data reading
Supervisor mode
( 3 )
2F7_3000.001.021
05/10/26 [E1F9]
Messa g e display
Supple m ent
( N or m ally : 00 )
Classi f ication
( N or m ally : 0 )
Product code
2F7: T his m achine
R elease date :
Y ear / Month /D ay
Checksu m
Update history
B uild nu m ber
F ir m ware cate g ory
10: E n g ine controller
30: Main controller
Power switch : O n
Power switch : O n
Power switch : Off
US B m e m ory
US B
m e m ory
slot