Kyocera 1102RX3NL0, Руководство по эксплуатации

Страница: 134 / 242

6-11
Setup and Registration (System Menu) > System Menu
TCP/IP
Item Description
TCP/IP Select whether to use TCP/IP (IPv4) Protocol.
Value : Off, On
DHCP Select whether to use the DHCP (IPv4) server.
Value : Off, On
Auto-IP Select whether to use Auto-IP.
Value : Off, On
IP Address Set the IP address.
Value : ###.###.###.###
NOTE
When DHCP is set to [ On ], this item is displayed only and cannot be entered.
Subnet Mask Set the IP subnet mask.
Value : ###.###.###.###
NOTE
When DHCP is set to [ On ], this item is displayed only and cannot be entered.
Gateway Set the IP gateway address.
Value : ###.###.###.###
NOTE
When DHCP is set to [ On ], this item is displayed only and cannot be entered.
IMPORTANT
• When setting the Auto-IP, enter "0.0.0.0" in [IP Address].
• After changing the setting, restart the network or turn the machine OFF and then ON.