Kyocera Mita FS-1050, Руководство по эксплуатации

Страница: 78 / 209

Using the Operator Panel
1-68
3
Press the > key.
4
Press the or key until
>Override A4/LT
appears.
5
Press the ENTER key. A blinking question mark (
?
) appears.
6
Select
On
or
Off
using the or key.
7
Press the ENTER key.
8
Press the MENU key. The message display returns to
Ready
.
Customizing the Paper Type
The following describes the procedure used to set a user-defined paper type
for the printer. Eight custom user settings may be registered. After having
been set, any of them may be called up when setting the paper type for a
paper source.
The paper weight and print density can be set (see
Setting the Paper Setting the Paper Setting the Paper Setting the Paper
Weight Weight Weight Weight
on page
1-70 1-70 1-70 1-70
, and
Adjusting the Print Density Adjusting the Print Density Adjusting the Print Density Adjusting the Print Density
on page
1-71 1-71 1-71 1-71
) after
selecting the paper type to be customized as follows. For how to reset the
customized settings, see
Resetting the Type Adjust Resetting the Type Adjust Resetting the Type Adjust Resetting the Type Adjust
on page
1-73 1-73 1-73 1-73
.
1
Press the MENU key.
2
Press the or key until
Paper Handling >
appears.
3
Press the > key.
>Override A4/LT
Off
>Override A4/LT
? Off
Paper Handling >