Kyocera Mita FS-1050, Руководство по эксплуатации

Страница: 54 / 209

Using the Operator Panel
1-44
Improving the Print Quality
You can adjust a variety of features to enhance the quality of your
printouts with the printer. First, you can use the Kyocera Image
Refinement (KIR), a software algorithm designed to increase the quality of
your printouts. Also, activating the EcoPrint printing mode reduces toner
consumption during printing. Finally, you can adjust the printing
resolution and density.
KIR (Kyocera Image Refinement)
This printer incorporates the KIR (Kyocera Image Refinement) smoothing
function. KIR uses software to enhance resolution, resulting in high-
quality printing at resolution of 600 dpi and 300 dpi. The default is
On.
Set the print density to
3
when setting the KIR mode. For details on print
density, see Adjusting the Print Density on page 1-71 .
You can look at the check line, the last line on a status page, to make the
optimum KIR mode setting.
With KIR
Off
With KIR
On
(default)
Q
Note
Status Page
KIR Check
Lines
Optimized stripes
Optimized stripes Optimized stripes
Optimized stripes
The current KIR setting is optimal.
Dark vertical stripes
Dark vertical stripes Dark vertical stripes
Dark vertical stripes
Turn the KIR mode Off . Try printing a status page again. If you still
get dark vertical stripes, adjust the print density control to a lighter
setting.
White vertical stripes
White vertical stripes White vertical stripes
White vertical stripes
Turn the KIR mode On . Try printing a status page again. If you still
get white vertical stripes, adjust the print density control to a darker
setting.