© 2020 Kymeta Corporation. All rights reserved.
22
10 April 2020
700-00064 revA Kymeta™ u7 terminal user manual — TRM-U7H and TRM-U7X configurations
9.6
Attach mounting handle accessory kit
What’s in the kit
The mounting handle accessory kit consists of the following components:
(1) mounting handle
(1) Loctite 242
(4) socket head cap screw, 5/16" X 1"L, 18-8SS
Ball-end, hex key wrench, 1/4”
Mounting interface
Before you begin
Before replacing any components, familiarize yourself with
700-00065-000 Kymeta™ u7 terminal installation guide
TRM U7H U7X configurations
, section
Safety and handling instructions
.
⚠
Prior to replacing any parts, power down the u7 terminal and disconnect all power sources to avoid possible
injury from electric shock.
Assembly instructions
1.
Dismount the ODU and lay it face down on a clean, flat cushioned surface to protect the radome coating.
2.
Remove the four installed hex stand-off posts.
3.
Place the mounting handle on the ODU as shown below with the open section at the BUC.
