KYMCO UXV500iG, Руководство пользователя

Страница: 91 / 112

89
GENERAL MAINTENANCE
SPARK PLUG
Inspection & Replacement
The spark plug is an important engine component and is easy to
inspect. The condition the spark plug can indicate the condition of
your UTV’s engine.
For example, a very white center electrode porcelain color could
indicate an intake air leak or carburetion problem. Do not attempt
to diagnose such problems yourself. Instead, take your UTV
to a KYMCO dealer.
You should periodically remove and inspect the spark plug because
heat and deposits will cause the spark plug to slowly wear down
and erode. If electrode deterioration becomes severe, replace the
spark plug with one of the proper type.
    
NOTE: Before installing the spark plug, measure the elec-
trode gap with a feeler gauge and adjust to specification.
When installing the spark plug, always clean the gasket
surface and use a new spark plug if the sealing gasket is
pressed flat. Always tighten the spark plug to the speci-
fied torque.
Spark plug type CR7E (NGK)
Tightening torque..................... 73 lb-ft (17.2 N-m)
Electrode gap:
0.027 - 0.031 in
(0.7 - 0.8mm)
AIR CLEANER
Air Cleaner Element Service
The air cleaner element (air filter) requires periodic service because it
must be kept in good condition to prevent debris from getting into the
engine and causing premature wear.
To remove and service the air cleaner element, follow this procedure:
1. Remove the gear shift lever knob by removing the retainer
bolt
1
2. Remove the center console retainer screws
2
and remove
the console cover
1 1 1 1 1
2 2
2 2 2
Procedure continued on the next page