background image

                                                                                  - 19 -

(3) USE THE STARTER BUTTON

y

Push the starter button without rotating the
throttle grip.

y

If the engine fails to start after the starter button
is pressed for 3

4 seconds when it is warm,

rotate the throttle grip for 1/8

1/4 turn to

facilitate starting.

y

When the motorcycle is not used for a long time
or the fuel tank is empty, if the engine is still hard
to start after the fuel tank is refilled with gasoline,
slightly turn the throttle grip and press the starter
button for several times to start the engine.

y

In order to avoid battery overcharge, do not press
the starter button more than 5 seconds.

y

If the engine does not start after the starter button
is pressed for 5 seconds, wait for more than 5
seconds and then press the button again or start
the engine by the kick lever.

n

 CAUTION:

y

Don‘t press the starter button while the engine is
running; otherwise the engine will be damaged.

y

When starting the engine, the rear brake lever
must be applied to connect power and the
stoplight will come on when power is connected.

Содержание PEOPLE 150












































Отзывы: