38
DRIVE SELECT LEVER
page 50 ~ 51
The drive select lever is used to shift your ATV
into the low, high, neutral, reverse and park
positions. Refer to
for drive select
lever adjustment and operation.
(1) Drive select lever
(N) Neutral
(L) Low
(R) Reverse
(H) High
(P) Park
(1)
(L)
(H)
(P)
(R)
(N)
POTENTIAL HAZARD
Improper use of the locking steering.
WHAT CAN HAPPEN
The ATV could cause loss of control or
overturn.
HOW TO AVOID THE HAZARD
Always be sure you have released the
locking steering handlebar and steering
lock key is taken out before you begin to
ride.
Never lock the steering handlebar, when
the engine is starting.
WARNING
Apply the rear brake and shift the shift lever
into P position before turning off the engine
when parking the vehicle on an incline if you
park on an incline with shift lever in H, L or R
position, vehicle weight will make it difficult to
shift into neutral.
NOTE:
Содержание MXU500i-IRS-EFI
