KYLAND SICOM3000S, Руководство по установке оборудования, Страница: 28 / 30

Access
perform operations.
Table 10 CLI Command
View type Command Description
Management view SWITCH#show interface vlan 1 Query the current IP address of the switch
Management view SWITCH#show version Query the version of the switch
Management view SWITCH#reboot Restart the switch
Management view SWITCH#load default Restore the factory default configuration
Management view SWITCH#config terminal Enter Global Configuration Mode
7.2 Access through Telnet
Step 1: Connect the network port of the PC to the Ethernet port of the switch with a
network cable.
Step 2: On the Windows desktop, click Start and Run. Enter "telnet IP address" in the
run dialog box. For example, if the IP address of the device is 192.168.0.2 (default IP address
of the Kyland switch), enter "telnet 192.168.0.2" in the dialog box.
Figure 18 Access through Telnet
Step 3: Click OK and you can run the commands in Table 10 to perform operations in
the Telnet CLI.
7.3 Access through Web
Step 1: Connect the network port of the PC to the RJ45 port of the switch with an RJ45-