KYLAND SICOM3000S, Руководство по установке оборудования, Страница: 16 / 30

Connection
IGSFP-M-SX-LC-850-0.55 1000Base-X MM LC 850nm 0.55km
IGSFP-S-LX-LC-1310-10 1000Base-X SM LC 1310nm 10km
IGSFP-S-LH-LC-1310-40 1000Base-X SM LC 1310nm 40km
IGSFP-S-ZX-LC-1550-80 1000Base-X SM LC 1550nm 80km
Note:
The switch support optical power detection of SFP port, this function needs SFP module with
DDM, if you want to get more detailed information, please contact market or technical engineer.
4.3.1 SFP optical module
Figure 8 SFP optical module
SFP optical module interface adopts standard LC fiber connector, each interface is
divided into transmit port (TX port) and receive port (RX port). To enable communication
between Device A and Device B, connect the TX port of Device A to the RX port of Device B,
and the RX port of Device A to the TX port of Device B, as shown in the below figure.
Figure 9 SFP optical module connection

How to Connect the SFP Optical Module
Insert the SFP optical module into the SFP slot in the switch, and then insert the fibers
into the TX port and RX port of the SFP module.