KYLAND SICOM3000S, Руководство по установке оборудования, Страница: 13 / 30

Connection
4 Connection
4.1 10/100/1000Base-T(X) ethernet port
10/100/1000Base-T(X) Ethernet port uses standard RJ45 connector. The port supports
self-adaptive and it can be automatically configured to 10M/100M/1000M, full or half duplex
mode. The port can also support auto MDI/MDI-X, that is connect the port to a terminal or
network device with a straight-through or cross-over cable.

Pin Definition
Figure 6 RJ45 PIN number
Table 2 10/100Base-T(X) Ethernet Port PIN Definition
PIN MDI-X signal name MDI signal name
1 Receive Data+ (RD0+) Transmit Data+ (TD0+)
2 Receive Data- (RD0-) Transmit Data- (TD0-)
3 Transmit Data+ (TD1+) Receive Data+ (RD1+)
4 Receive Data+ (RD2+) Transmit Data+ (TD2+)
5 Receive Data- (RD2-) Transmit Data- (TD2-)
6 Transmit Data- (TD1-) Receive Data- (RD1-)
7 Transmit Data+ (TD3+) Receive Data+ (RD3+)
8 Transmit Data- (TD3-) Receive Data- (RD3-)
Note:
"+" and "-" indicate level polarities.