KYLAND SICOM3000S, Руководство по установке оборудования, Страница: 10 / 30

Mounting
3 Mounting
3.1 Dimension
Figure 3 DIN-rail mounting dimension (mm)
Caution:

As part of the heat dissipation system, the switch housing becomes hot during
operation. Please do not cover the switch housing when the switch is running.

The figures in this manual are only for reference.
3.2 Mounting Modes and Steps
The switch supports DIN-rail mounting. Before installation, make sure that the following
requirements are met.
1) Environment: temperature (-40
℃
to 85
℃
), ambient relative humidity (5% to 95%,
non-condensing).
2) Power requirements: Verify that the operating voltage matches the voltage range
identified on the switch.
3) Grounding resistance: <5

。
4) Avoid direct sunlight, away from heating sources or areas with strong electromagnetic