Connection
11
Figure 10 Connection Using Straight-through/Cross-over Cable
Note
：
The color of the cable for RJ45 connector meets the 568B standard: 1-orange and white,
2-orange, 3-green and white, 4-blue, 5-blue and white, 6-green, 7-brown and white, and
8-brown.
4.2 100Base-FX Ethernet Port
100Base-FX Ethernet port is equipped with FC/ST/SC connector, and each port consists of
TX (transmit) port and RX (receive) port. To enable data transmission between Device A and
Device B, connect the TX port of Device A to the RX port of Device B, and the RX port of
Device A to the TX port of Device B. The following uses an SC port as an example. The
wiring sequence of an ST/FC port is the same with that of the SC port.
Figure 11 Connection of 100Base-FX Ethernet Port
Caution:
The device uses laser to transmit signals in fibers. The laser meets the requirements of level 1