13
Property
FX(FC/SC/ST)
Transmission Distance (Km)
2 5 40 60 60 80
Applicable Distance (Km)
0~2
0~5
0~40 6~60 4~60 10~80
Luminous
power
Min. (dBm)
-19
-12 -8 -8 -8
Max. (dBm)
-11
-4 0 -2 0
Receiving Sensitivity (dBm)
-31
-34 -34 -34 -34
Overload Luminous Power
(dBm)
-3
-3 -3 -3 -3
z
100M fiber port wiring (Take SC port as example; ST/FC wiring method is the
same with SC)
Figure 13 100M Fiber Port Wiring
Note
: A laser is used to transmit signals in fiber cables. The laser meets the requirements of level
1 laser products. Routine operation is not harmful to your eyes, but do not look directly at the fiber
port and fiber connector when the switch is powered on.
5.3 Power
According to the power input requirements, use a 5.08mm-spacing terminal block
to connect the power cable.
Note
: The cross section area of the power cable is required to be greater than 0.75mm
2
and less
than 2.5mm
2
. The grounding resistance requirement: <5
Ω
.