NZ284 Rev. 12/04/19
2. Read through entire instruction before beginning assembly and installation.
SHELTERS MUST BE ANCHORED AT ALL TIMES WITH PERMANENT GROUND ANCHORS.
1. Unpack all parts and check for damage that may have occurred during shipping. If damage has occurred,
notify Kwik Goal immediately. Lay out all parts. Remove all cardboard and packaging immediately. Wet or
damp packaging may damage contents.
ASSEMBLY INSTRUCTIONS FOR 9B1201 SHELTER DOLLY
Parts
Assembly Tools
Handle Support Brace (1)
(Part# UZ1110)
Dolly Handle (1)
(Part# UZ1112)
Spacer Plate (4)
(Part# UZ1311)
7/16”, 1/2” & 9/16”
Wrenches
Pliers
Ratchet with
7/16”, 1/2” & 9/16”
Sockets
Dolly Tire (2)
(Part# VZ639)
Dolly Axle Assembly (1)
(Part# UZ1312)
Swivel Tire (4)
(Part# VZ629)
Swivel Tire
Mount Assembly (4)
(Part# UZ1104)
Bumper (1)
(Part# VZ821)
5/32” Hex wrench
5/16” X 1-1/2” Hex Bolt
(Part# TZ341)
(16)
Note: Hardware may be packaged separately
Hardware
in one or more boxes. Open all packages
before beginning assembly.
3/16“ X 1-1/2” Cotter Pin
(Part# TZ310)
(2)
1/4” U-Bolt
(Part# TZ309)
(2)
1/4” Flat Washer
(Part# TZ147)
(4)
1/4“ Lock Nut
(Part# TZ19)
(4)
5/16” Flat Washer
(Part# TZ4)
(16)
3/8” X 3" Hex Bolt
(Part# TZ325)
(1)
3/8” Flat Washer
(Part# TZ189)
(4)
3/8” Lock Nut
(Part# TZ197)
(2)
3/4” Flat Washer
(Part# TZ2)
(4)
5/16“ Lock Nut
(Part# TZ5)
(16)
3/8” X 2-1/2” Hex Bolt
(Part# TZ165)
(1)
1/4” X 1-1/4” Button Head
(Part# TZ397)
(1)
THIS EQUIPMENT MUST BE STORED IN A SECURED, SHELTERED AREA WHEN NOT IN USE OR IN THE THREAT
OF HIGH WINDS. ANY WEATHER DAMAGE TO THIS EQUIPMENT WILL NOT BE COVERED UNDER KWIK GOAL’S
PRODUCT GUARANTEE. DO NOT LEAVE THIS EQUIPMENT UNATTENDED.
140 Pacific Drive Quakertown, PA 18951
800-531-4252 Kwikgoal.com
2010, Rev 2019 Kwik Goal Ltd.
©
