NZ186 Rev. 10/24/13
140 Pacific Drive Quakertown, PA 18951
(P) 215-536-2200 / (P) 800-531-4252 / (F) 215-536-4309 / (F) 800-778-8869
Visit our website @ kwikgoal.com
2002, Rev. 2013 Kwik Goal Ltd.
ASSEMBLY INSTRUCTIONS FOR 2B2201 (PROJECT STRIKEFORCE)
1. Unpack all parts and check for damage that may have occurred during shipping. If damage has occurred,
notify trucking company immediately. Lay out all parts. Remove all cardboard and packaging immediately.
Wet or damp packaging may damage contents.
2. Read through entire instruction before beginning assembly and installation.
3. If goal is to be used in a portable application continue to step 4. If goal is to be used in a more permanent
application skip steps 4 through 6 and begin assembly with step 7.
Net (1)
(Part# 3B3041)
Post (2)
(Part# UZ481S)
Base (2)
(Part# UZ480S)
Crossbar (2)
(Part# UZ479S)
Most Kwik Goal products carry a
Lifetime Guarantee
. For details or
claims, visit
kwikgoal.com
or contact customer service at
1-800-531-4252
.
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL
TIMES and shall be secured against overturning. Do not climb on the net or goal framework at any time!
All fastenings must be checked to insure they are fully tightened before and after each use of this product.
Goal posts not in use must be disassembled and properly stored in a safe, secure area (See included
Guidelines for Moveable Soccer Goal Safety.). Assembled goal posts should not be left unattended.
Remove nets when goals are not in use. Do not use this equipment during the threat of high winds. Goal
posts should be checked for safety before and after each use. All warning and safety labels included with
this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
Ground Anchor (4)
(Part# 10B1201 Pack of 4)
Parts
Net Fastener (6’)
(Part# MNF-1 Roll of 12’)
