NZ467 Rev. 09/08/21
2. Read through entire instruction before beginning assembly and installation.
ASSEMBLY
INSTRUCTIONS
FOR
10B4608 GOAL ANCHOR WEIGHTS
1. Unpack all parts and check for damage that may have occurred during shipping. If damage has occurred,
notify Kwik Goal immediately. Lay out all parts. Remove all cardboard and packaging immediately. Wet or
damp packaging may damage contents.
Anchor Weight (4)
(Part# UZ1683)
Rubber Pad (12)
(Part# VZ888-01)
Parts
140 Pacific Drive Quakertown, PA 18951
800-531-4252 Kwikgoal.com
2021Kwik Goal Ltd.
©
Hardware
(Part# JZ278)
7/16” X 2-3/4” Hex Bolt
(Part# TZ48)
(2)
7/16” X 6” Hex Bolt
(Part# TZ380)
(2)
7/16” Large Flat Washer
(Part# TZ422)
(6)
7/16” Lock Nut
(Part# TZ47)
(4)
7/16” Flat Washer
(Part# TZ171)
(2)
Ratchet with
5/8” Socket
5/8” Wrench
9/
16
Assembly Tools
3. Peel backing off rubber pad,
place on the inside in the center of both sides and top of anchor weights as
shown.
Rubber Pad
Anchor Weight
All sports equipment must be anchored at all time. Sports equipment must have the proper amount of
counterbalance weight and be attached in locations stated by Kwik Goal instructions. Do not move sport
equipment with counterbalance weight attached. Sports equipment not in use must be diassembled and stored
in a safe, secure place. Assembled sports equipment should not be left unattended. Do not use any sports
equipment during the threat of high winds. Sports equipment should be checked for safety on regular basis. Any
modifications to this or any Kwik Goal product will void any and all warranties.
***CAUTION***
