14
NORMAL CLEANING
STUBBORN STAINS
DEEP CLEANING
KwickScreens have been designed in line with infection control performance specifications.
It’s smooth surfaces are easy to clean and designed to withstand regular cleaning. The body is
made of anodized aluminium, other metal parts are powder coated steel. The screen panel is
made with polyester film.
Surfaces can be cleaned using most
healthcare cleaning solutions including
quaternary, bleach solutions or sporicidal and
virucidal disinfectants.
Hyplochlorite may also be used on the screen
material. Hypochlorite can be applied at
1000-10000 ppm or a 60% alcohol solution.
•
Wax polishes or solvents
•
Products with an abrasive surface as
steel wool
•
Detergents which can form lime or
synthetic detergents
•
Alkalis (over pH10)
•
Solvents
•
Gasoline
•
Greases or oils
•
Abrasive cloths or kitchen scouring
compounds to clean the printed
screen panel
•
Any sharp instruments or razor
blades to scrape the surface
Do not clean in direct sunlight or in
elevated temperatures.
If normal cleaning does not remove all stains
the following cleaning agents may be used at
room temperature:
·Methyl butyl alcohol
·Naptha VM&P
·Ethyl alcohol
·Isopropyl alcohol
Care should be taken with printed panels
when using alcohol based agents.
WHEN CLEANING THE
KWICKSCREEN DO NOT USE:
AFTER CLEANING, LEAVE THE SCREEN EXTENDED TO DRY
DO NOT RETRACT WHILST THE SCREEN IS WET
Deep cleaning is recommended every 3-4
months. To deep clean, fully extend the screen
and clean inside the body.
CLEANING
!
