Produktentwicklung
kwb Germany GmbH · Hauptstrasse 132
28816 Stuhr, Germany · www.kwb.eu
Technical Data - figure 3
Type:
Electric gun tacker
Model:
kwb TT 18
kwb TT 26
Voltage:
220 - 240 V
220 - 240 V
Min. fuse:
10 A
10 A
Firing frequency:
20
20
Staples type/length:
053/8 - 20
055/12 - 25
Pins type/length:
055/16 - 19
055/16 - 25
Length of magazine:
130 mm
130 mm
Extension cord:
Min. 1,5 mm², Max. 20 m lang
Dimensions/mm:
213 x 190 x 60 mm
Weight/kg:
1,6 kg
1,6 kg
Noise level:
Noise measurements made according to prEN CEN/TC 255 WG 1 N 45.3 E
“Noise test code for fastener driving tools”.
Vibration:
Measurements made according to standard proposal prEN CEN/TC 255 WG 1 N 47.4.E.
Equivalent noise level dB(A) at maximum capacity. Ex. 1440 staples per 8 hours to give 70 dB(A) Figure 3. Always wear
ear protection at equivalent noise level > 85 dB(A) due to risk of impaired hearing.
Vibrations in handle at working speed 20 staples per minute and full impact power: <2.5m/s²
Maintenance and cleaning – figure 4
Unplug the gun and empty the magazine of staples or tacks. Remove the front plate and clean the staple outlet by blowing.
Lubricate the driver and staple outlet with a drop of oil (1) Never clean using solvents or other volatile agents.
Clean the housing with a damp rag. Do not lubricate internal parts of the gun. The gun must be kept dry. Check that the
cable and plug are intact. If in any doubt, contact the Kwb Service Center.
Loading staples and pins – figure 5
Hold the gun firmly. The safety-catch (1) must be in position A, i.e. its far rear position. Pull back the staple feeder (2)
and turn it up into its loading position (3) Insert the staples/pins into the magazine (4) and return the staple feeder to its
working position (5).
kwb TT 18: Staples are to be placed into the middle slot of the magazine.
kwb TT 26: Pins are to be placed into the right (inner) slot of the magazine.
Repairs
Never dismantle the gun for the purpose of changing or modifying anything. All repairs must be carried out solely by
specially trained personnel. When making enquiries always state product model, voltage, staple type etc.
IMPORTANT NOTICE TO THE USERS
– In conformity with Art. 13 of Law Decree dated July 25th, 2005, n. 151 “Fulfilment of the Directives 2002/95/CE,
2002/96 CE and 2003/108/CE, on the restriction on use of certain hazardous substances in electrical and electronic equipments, and on waste electrical
and electronic equipment” (WEEE)
The symbol of the crossed-out wheeled bin marked on the electric equipment means that the product at the end of its life cycle must be collected sepa-
rately from other types of waste. Therefore the user will have to deliver the equipment that reached the end of its life cycle to proper separate collection facilities
of electronic and electric waste. Or he must deliver it to the dealer when purchasing a new similar electrical equipment, on one-to-one basis. The proper separate
collection to convey the disued equipment for recycling, treatment and waste in compliance with the environmental directions will help to avoid possible negative
environmental effects and on the human health and will help recycling of the materials of the electrical equipment. Direct and abusive waste of the product from
the user will allow application of the penalties as per D.Lgs. n. 22/1997 (Article 50 and following ones of D.Lgs. n. 22/1997).
DECLARATION OF CONFORMITY
kwb Germany GmbH
·
Hauptstrasse 132
·
28816 Stuhr, Germany.
declare under our sole responsibility that the product TT 18/TT 26 to which this
declaration relates is in conformity with the following standards or other nor-
mative documents EN50144-1:1995, prEN50144-2-16:1996, EN55014:1991,
EN55014-2:1997, EN61000-3-2:1995, EN61000-3-3:1995 the following
provisions of Directive MD98/37/EEC, LVD73/23/EEC, EMC89/336/EEC
GB
5
BedAnleitung 24sprachig.indd 5
27.01.15 13:19
